RaceMe Ultra | EGR DPF DEF COMPLETE DELETE KIT | Tranny Tuning | Cummins 2007.5-2018

2007.5-2018 Dodge Ram 2500 and 3500 & for all pickup and cab chassis. COMPLETE EGR DPF DEF DELETE KIT.

Multiple Gauges Screen Layout

• Transmission Tuning (stock, default & aftermarket transmission tuning.)
• +200 HP on rear wheel.
• TPMS Feature to adjust tire pressure.
• One touch easy menu navigation.
• Speed limiter adjustable.
• Real-time programming (on nearly all parameters.)

POWER LEVELS

1. Stock.
2. 40hp heavy tow.
3. 80hp light tow.
4. 100hp mpg.
5. 150hp street.
6. 200hp race.

EGR Kits, RACE Pipes & Exhaust Systems are High Quality FloPro or P1 (MBRP)

PRODUCTS ARE FOR OFFROAD COMPETITION & ORGANIZED RACING ONLY!

With latest software, the RaceMe Ultra has now a TPMS feature to adjust tire pressure to get rid of the warning messages by selecting a different PSI threshold.

RaceME Ultra Supported Models.

1. All Pickup Models 2007-2018
2. ALL Cab & Chassis Models 2007-2018
3. INCLUDES ALL NECESSARY HARDWARE TO UNLOCK THE ECM AND TUNE 2013+ AND NEWER
4. RT (Real Time) Programming fully supported for all trucks 2007.5- 2018.
5. The 2007.5-2009 trucks now support RT functions with Box tuning in Software versions RAME007A and newer.
6. Real Time allows customer to program truck on the road to every stage he wants, with different adjustments in duration, timing, VGT and rail pressure to the level he wants. Simply by pressing the “Send” button, the adjustments are instantly available and programmed.
7. Transmission tuning for stock transmissions. (Not for Aisin equipped trucks) Only for 2010-2018 PU models.

COMPLETE TRANNY TUNING INCLUDED

• Raised line pressure in all Fwd gears AND during the shifts.
• Increased shift firmness for less slip in the clutches.
• Changed shift points at WOT in all gears @ 3000 RPM.
• 6th gear unlock and downshift to avoid the massive torque and make the transmission last longer.
• Line pressure 225psi
• Line pressure rises faster now with altered throttle position value to get the higher pressure before the high torque is entering transmission.

Not for Aisin equipped trucks, Only for 2010-2018 PU models. TUNER WILL WORK GREAT WITH AISIN EQUIPTED TRUCKS, BUT WILL NOT TUNE THE TRANNY.

MORE DETAILS

• Modern Design with Touch Screen Functionality And Range Of Gauge Monitoring Options
• Includes Necessary Hardware For Unlocking 2013+ Which Is Done As Part Of The Program
• No Special / Complicated Unlock Procedures Required, Connect Necessary Cables And Install Tune!
• Tune Uses Latest High Speed Transfer, Usually Takes 7 Minutes Max!
• Monitor Comes With User Defined Layouts/ Dashboard
• Memory Supports All Files From 2007 And On
• No Reloading / Changing Files Required For Installing On Different Year Models, All Inclusive.
• Updatable With Customer Friendly Update Using MicroSD, Simply Load The Update File Onto Card, Reinsert And Update Unit.
• Read / Clear Diagnostic Trouble Codes.
• Late Injection Events (Post Injection) Is Disabled On All Tunes
• Speedometer Recalibration For Use Of Non-Stock size tires
• Speedometer Recalibration For Use Of Non-Stock size tires
• Remove / Adjust Top Speed Limiter.
• Tune engine HP increases of up to 200HP in 5 stages (NOTE: Power increase maximum differs between model years)
• EGT sensor optional accessory to monitor accurately up to 2200 degrees F.
• Stage 0 has stock power without DEF/DPF/EGR and no options, simply stock for the careful user.
• End User Customizable Injection Timing For Better Economy And/Or Power.
• Special ECM Recovery Functions In The Event Of A Programming Sequence Being Disrupted Or Ending With A Fault.